
What to Do When the Power Goes Out at Home

Knowing what to do when the power goes out at home comes down to one question: is it just your home, or the whole street? The answer tells you whether to reset your switchboard, report an outage to Western Power or call an emergency electrician.
Here’s the checklist our Perth electricians recommend, in the order we’d work through it.
What to do if the power goes out, in short:
- Look outside to see whether your neighbours and streetlights still have power.
- Check your switchboard for a tripped safety switch, circuit breaker or main switch.
- Check the Western Power outage map or call Western Power on 13 13 51.
- Switch off and unplug sensitive electronics.
- Keep your fridge and freezer doors closed.
- Stay at least 8 metres away from any fallen power lines.
- Call a licensed electrician if only your home is affected and the switchboard won’t reset.
Step 1: Check If It’s Just Your Home or the Whole Street
The fastest way to work out why your power is out is to look outside. If your neighbours’ lights, the streetlights and nearby traffic lights are all off, the outage is on the Western Power network and nothing at your switchboard will fix it.
A dark home on an otherwise lit street means the problem is on your side of the meter: your switchboard, your wiring or the supply into your home. That supply includes your private power pole if your property has one. When a storm or pole-top fire damages the pole, power can stay off until it’s repaired, and a badly damaged pole needs private power pole replacement.
Why Is My Power Out? Common Causes
| What You Notice | Likely Cause | Who Can Help |
|---|---|---|
| The whole street is dark, including streetlights | Network outage from a storm, a pole-top fire, equipment failure or planned maintenance | Western Power, 13 13 51 |
| Only your home is out and a safety switch has tripped | Earth leakage from a faulty appliance, damaged cable or wet outdoor power point | Reset it yourself; call an electrician if it keeps tripping |
| Only some rooms or power points have no power | A tripped circuit breaker, or in a three-phase home, one phase of supply has dropped out | Reset the breaker; call an electrician if it won’t stay on |
| Only your home is out and everything at the switchboard is on | A fault in your consumer mains, service line or private power pole | An electrician, who can confirm whether the fault is yours or Western Power’s |
| A tingle from taps or appliances, often with dimming or flickering lights | A possible neutral fault, which can make metal fixtures live | Western Power, immediately |
A three-phase home has three separate supplies coming in from the street. Losing one leaves part of your home without power while the rest keeps running, which can look like a switchboard problem when it isn’t.
Pole-top fires can also cut power, particularly after a spell of dry, dusty weather. According to Western Power, light rain or humidity mixes with built-up dust, salt and pollution on power pole insulators, creating a path for electricity that can set the pole top alight. Keep well away from a burning or damaged pole and report it.
Step 2: Check Your Switchboard
Your switchboard is the next place to look when the rest of the street still has power. Check the meter box on an outside wall first, then a garage, laundry or hallway cupboard.
Use a torch or your mobile’s light, not a candle. Look for any switch sitting in the “off” or middle position. Safety switches (also called RCDs) usually have a small “T” or “Test” button; circuit breakers don’t.
How to Reset a Tripped Safety Switch or Circuit Breaker
- Switch off or unplug the appliances on the affected circuit.
- Push the tripped switch fully to “off”, then back to “on”.
- If it stays on, plug your appliances back in one at a time.
- If the switch trips again when a particular appliance goes back on, leave that appliance unplugged and have it checked.
- If it still trips with everything unplugged, stop resetting it and call an electrician. The fault is in the wiring, not an appliance.
A safety switch trips to protect you from electric shock. One that won’t stay on is doing its job and pointing you to a fault. Our guide on why your safety switch keeps tripping covers the most common causes.
Don’t Touch the Switchboard If You Notice:
- A burning smell, scorch marks or melted plastic
- Buzzing, crackling or sparking
- Water in or around the switchboard
- A switchboard that feels hot to the touch
These are signs of a serious fault that needs an electrician urgently. Keep everyone clear until one arrives. Older switchboards with ceramic fuses are more prone to these problems; here are the signs you need to replace your switchboard.
Step 3: Check for a Power Outage in Perth
For a street-wide outage, check the Western Power outage map. Western Power runs the poles and wires across Perth and the South West, and its outage page lists current, upcoming and resolved outages by area. You can also register there for SMS updates.
To report an outage or a fault, call Western Power on 13 13 51. Your electricity retailer, such as Synergy, handles billing, not network repairs.
Planned outages for maintenance appear on the same page. Before a planned outage, charge your mobile and keep a torch where you can find it.
What to Do in a Power Outage to Stay Safe
The priorities in a power outage are protecting your appliances, keeping food cold and avoiding hazards such as fallen power lines and unsafe generator use. Use a torch rather than candles, and check on anyone at home who relies on powered medical equipment.
Protect Your Appliances
Power can return with a surge that damages TVs, computers and other sensitive electronics. Switch them off at the wall and unplug them until supply is back. Turn off anything that could be a hazard if it came back on unattended, such as heaters, ovens, irons and hair straighteners.
Leave one light switched on; when it comes back on, the power has been restored.
Keep Your Fridge and Freezer Closed
According to HealthyWA, food stays safe in a closed fridge for about 2 hours. Perishable food that has been above 5°C for 4 hours or more should be thrown out.
A full freezer with the door kept shut can keep food frozen for up to 48 hours; a half-full freezer for about 24 hours. Throwing food out is the safest option whenever you’re unsure how long it has been warm.
Stay Clear of Fallen Power Lines
Treat every fallen power line as live. Western Power advises staying at least 8 metres away and calling 13 13 51 to report it. In a life-threatening emergency, call 000.
If a power line falls on your car, Western Power advises staying inside the vehicle until emergency services arrive, unless a fire forces you out.
Report Tingles or Shocks Straight Away
A tingle from a tap, shower or appliance can mean metal fixtures in your home have become live. Western Power treats this as an emergency. Stop using water and call 13 13 51.
Use Generators Safely
Never run a portable generator indoors or in a garage, as the exhaust produces carbon monoxide. Never plug a generator into a power point or wire it into your switchboard either. Power can feed back into the street and endanger line workers. Any generator connection needs a compliant changeover switch or inlet, installed by a licensed electrician.
Plan Ahead If Someone Relies on Medical Equipment
Anyone in your home who uses life support or other powered medical equipment should be registered with your electricity retailer, with a backup plan ready for outages. In Perth’s summer heat, also check on elderly neighbours who may be without air conditioning.
When the Power Comes Back On
Wait a few minutes before turning everything back on, then reconnect appliances one at a time. Switching on several high-load appliances at once, such as air conditioners and pool pumps, can trip a circuit breaker.
Check your fridge and freezer, and reset any clocks and timers. A safety switch that keeps tripping or a burning smell after the power returns needs attention: switch off the affected circuit and call an electrician.
When No Power in the House Means Calling an Electrician
A network outage is Western Power’s to fix. Faults on your property are where our electricians come in. Call an emergency electrician if:
- Your home has no power, but your neighbours do, and everything at your switchboard is on
- Your safety switch or circuit breaker trips again as soon as you reset it
- Your switchboard or power points show scorch marks, smell of burning or make a buzzing sound
- Your private power pole is leaning, cracked or burnt, or a storm has damaged the service line to your home
- Your power comes back but only some rooms or appliances work
24/7 Emergency Electricians Across Perth
Voltaic Electrical can help when the fault is inside your home or on your property’s supply. Our emergency electricians arrive in an average of two hours, day or night, to find the cause and restore power safely.
We’re fully licensed and insured (EC 15870), and all our work is backed by our lifetime workmanship warranty. If you need help with a power outage at home, call us on (08) 9444 9170.
More Resources

What’s the Difference Between Single and Three-Phase Switchboards?

EV Charger Comparison: How to Compare EV Chargers for Your Home

Why Does My Safety Switch Keep Tripping?

How Much Does Private Power Pole Replacement Cost in Perth?

What Counts as an Electrical Emergency?

Where Should You Install an EV Charger at Home?

Get Expert Electrical Help Today!
Why Perth Trusts Us for Their Electrical Needs
What Our Happy Customers Are Saying
Get Expert Electrical Help Today
- Perth CBD & Inner Suburbs
- Northern Suburbs
- Southern Suburbs
- Eastern Suburbs & Hills
- Coastal Areas & Surrounding Regions